SZ ADE Electronics Co., Ltd
Honest and trustworthy, hand in hand, customer trust is the life of ADE.
Add to Cart
ISO5852SMDWREP Coupling 5700Vrms 1 Channel 16-SOIC 5.5A Isolators Gate Driver
Features of ISO5852SMDWREP
1• 100-kV/μs Minimum Common-Mode Transient
Immunity (CMTI) at VCM = 1500 V
• Split Outputs to Provide 2.5-A Peak Source and
5-A Peak Sink Currents
• Short Propagation Delay: 76 ns (Typ),
110 ns (Max)
• 2-A Active Miller Clamp
• Output Short-Circuit Clamp
• Soft Turn-Off (STO) during Short Circuit
• Fault Alarm upon Desaturation Detection is
Signaled on FLT and Reset Through RST
• Input and Output Undervoltage Lockout (UVLO)
with Ready (RDY) Pin Indication
• Active Output Pulldown and Default Low Outputs
with Low Supply or Floating Inputs
• 2.25-V to 5.5-V Input Supply Voltage
• 15-V to 30-V Output Driver Supply Voltage
• CMOS Compatible Inputs
• Rejects Input Pulses and Noise Transients
Shorter Than 20 ns
• Operating Temperature: –55°C to +125°C
Ambient
• Surge Immunity 12800-VPK (according to IEC
61000-4-5)
• Safety-Related Certifications:
– 8000-VPK VIOTM and 2121-VPK VIORM
Reinforced Isolation per DIN V VDE V 0884-10
(VDE V 0884-10):2006-12
– 5700-VRMS Isolation for 1 Minute per UL 1577
– CSA Component Acceptance Notice 5A, IEC
60950-1, IEC 60601-1 and IEC 61010-1 End
Equipment Standards
– CQC Certification per GB4943.1-2011
– All Certifications Complete per UL, VDE, CQC,
TUV and Planned for CSA
| TYPE | DESCRIPTION |
|---|---|
| Category | Isolators Isolators - Gate Drivers |
| Mfr | TI |
| Series | - |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Product Status | Active |
| Technology | Capacitive Coupling |
| Number of Channels | 1 |
| Voltage - Isolation | 5700Vrms |
| Common Mode Transient Immunity (Min) | 100kV/µs |
| Propagation Delay tpLH / tpHL (Max) | 110ns, 110ns |
| Pulse Width Distortion (Max) | - |
| Rise / Fall Time (Typ) | 18ns, 20ns |
| Current - Output High, Low | 1.5A, 3.4A |
| Current - Peak Output | 2.7A, 5.5A |
| Voltage - Forward (Vf) (Typ) | - |
| Voltage - Output Supply | 15V ~ 30V |
| Operating Temperature | -55°C ~ 125°C |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295", 7.50mm Width) |
| Supplier Device Package | 16-SOIC |
| Approval Agency | CQC, CSA, TUV, UL, VDE |
| Base Product Number | ISO585 Environmental & Export Classifications |
Environmental & Export Classifications
| ATTRIBUTE | DESCRIPTION |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| REACH Status | REACH Unaffected |
| ECCN | EAR99 |
| HTSUS | 8542.39.0001 |
Description of ISO5852SMDWREP
The ISO5852S-EP device is a 5.7-kVRMS, reinforced isolated gate driver for IGBTs and MOSFETs with
split outputs, OUTH and OUTL, providing 2.5-A source and 5-A sink current. The input side operates
from a single 2.25-V to 5.5-V supply.
